Clutch Modification
I attached my Gopro camera to the under side of my Jeep so I could see how much deflection I could see with this new set up.
As you can see it had a little to much for me to be happy with. The video was the easy part. Trying to figure out how to eliminate this movement was a little tougher than I thought. After a couple of tries I think I cam up with a feasible solution. A trip to the store later for a piece of 1/4″ steel I had this.
This is what the deflection looks like after this was completed.
With almost all deflection gone the risk of breaking off the heads of the mounting hardware should be greatly reduced. As a side note, I need to fix a couple of fluid leaks on the rear end and the transfer case. Watch for these fixes later.
