Pertneer's Blog

Since I have completed this project and not updated the outcome I figured an update was in order.

Since I finished this I have used it quite a bit, but it has a few flaws.

• it proved to be very hard to get the lines to meet exactly where they needed to be, I should have designed in a was to adjust them
• The laser of choice did not last as long as I had hoped. Although they worked great for the first couple of days, they have since become very dim. Almost to the point of not being able to see them any more.
• needed to incorporate a better way to plug them in. I only used a drop cord for the first few days as a power source and never finished the wiring (well they were to dim to use anyway)

What i would change (read on)

(more…)

Been a while since I did a write up for this blog. I guess it is overdue.

A couple of weeks ago I was trying to line up a sheet on the Plasma table and struggling to locate a part within a piece of material very close to the same size as I was planning to cut. I told myself, “Self you need to make something to help with this little issue”. I only talk to myself on very rare occasions. Stop being so judgmental.

I decided to take a trip to the hardware store to see what I could use to make a device to locate my sheet. First thought was a device that went off of the edge of the table but seams too simple. So then I though about using a laser to help locate the sheet. Sounded like a nice little project. So I went in search of some sort of laser line generator. Off to the laser level isle. I found a cheap little level that had a laser line that could be rotated for around 15 bucks. Was hoping for something a little cheaper because I would need two of these.

I started off with just purchasing one (tight budgets suck) to make sure it would work as I expected.

(more…)

I got my New Hypertherm Powermax 65 torch this weekend and finally got it hooked up. After a minor voltage divider issue I have it working satisfactory for now. I do have some intermittent issues with vibrations in the z axis that sometimes leaves a serated edge. I believe these to be from the excessive weight of the z axis. I am in the process of figuring what can be done to resolve these issues, but I need to cut myself a tray to hold the keyboard and mouse. Here is the design I came up with.

(more…)

It has been a while since I have posted on the progress of my CNC Plasma build. So I guess an update is in order.

I ordered a Powermax 65 and it should arrive sometime late this week. I have the water table and reservoir tank plumbed and ready to go, I ran a hard line for air to the plasma this last weekend and I am finishing up the last bits before the torch arrives.

I should be able to provide some HD videos at that time, since I also made a mount for my GoPro camera to shoot from atop the z-axis. Should be some interesting shots I hope. So far the video without the torch looks really good, but I guess HD should be, right?

I will have pictures and maybe video this next weekend if everything goes as planned. Stay tuned!

I spent some time today getting the computer stand portion of this project underway. I testing the machine with the computer just on a near by bench to make sure it was going to work before I got to carried away with the extra convenience items. With this design I wanted it to be able to reach most of the table while still having access to the controls. The design I came up with uses a swings arm that holds the keyboard and monitor, while keeping the computer under the table out of the way of splashing water. Water and computers do NOT mix.I will need to find a longer cable for the monitor but I have seen longer cables that it currently has on it, so no big deal there.

I spent to much time working on it today and did not stop to take any pictures. Sometimes I hate stopping the progress for a photo opportunity. I will try to get some as soon as I can. I just want to tidy up a couple of things before I take the photos. 🙂

I needed some tools to make some calculation for certain areas of the build of my plasma table. I have decided that these tools may be of use to others also as they begin their journey building a CNC Plasma.

(more…)

I have been running the machine through its paces the last few days. Today I testing the positioning accuracy of it today. I wrote a program to have the machine rapid out 84 inches then rapid back to with in 1 inch of zero then feed into zero. I did this 20 times and the machine stopped at zero plus or minus .0003 every time.

Enjoy the video.

Since I recently got this machine actually moving I have been putting it through some tests. The other day I create a G-code program to move the table throughout its travel in various directions to make sure it worked as expected and returned to its previous position.

Since the table is driven by stepper motors instead of servos loosing steps is always a concern. This is generally contributed with pushing the machine to fast resulting is the stepper motors loosing there count. Not sure why, but is does happen.

After tuning the motors in Mach 3 to suitable settings I proceeded with the testing. I started with the table at around a travel speed of 600 in/min but was not happy with the sound the table was making. It sounded like it was struggling to make the moves this fast. So I slowed it down to 450 in/min. Still a respectable speed for a rapid move. This sounded a lot better and leaves some room for improvement.

This video shows the path I programmed in and the speed in which it travels.

(more…)

As the title states I am testing the movement before I start using he torch(saves money until I make sure it is working properly.

It is kind of boring to watch, but in a later test it made a perfect circle very close to the diameter I programmed it to do. Not to bed for the first trial after setting it up.

I just took some additional pictures of some of the aspects that are not really clear in other pictures.

this first one shows the z-axis lead screw and placement of the stepper motor.

This one show the gear box from a overhead shot.

(more…)